Jlg 41EL Operator Manual Manuel d'utilisateur télécharger pdf (Page 41)

SECTION 4 - MACHINE OPERATION

3120781 – JLG Lift – 4-9

Transport Vehicle Tie Down

(See Figures 4-5, 4-6 & 4-7.)

When placing the EL machine onto a transport vehicle for

transport to another worksite, always tie machine securely

to the transport vehicle using the tie down lugs provided

on the machine. There are three tie down lugs, one on the

rear of the machine, and one on each side. There are also

two cross strap saddles at the center on each side of the

base frame. Use the tie down lugs and cross strap sad-

dles as needed. Tie down methods shown are for illustra-

tive purposes only.

Lifting

If it becomes necessary to lift the machine, use suitable

lifting equipment capable of handling the weight of the

machine, see below.

NOTE: Fork lifts, cranes, chains, slings, etc. must be capa-

ble of handling the following weights:

NOTE: All EL models are equipped with forklift pockets at

the mast end of frame for transporting the unit. An

optional lifting hook which attaches to the top rear of

the mast is available. Do not attempt to lift from over-

head without the optional lifting hook.

Figure 4-5. EL Tie Down Procedure - (When loaded

into a Pick-up Truck bed using the optional load

device).

FRONT OF TRUCK BED

TAILGATE

VIEW FR

VERHEAD

TIED TO

SIDE LUG

TIED TO

SIDE LUG

Table 4-2. EL Machine Gross Weights

EL Model Gross Weight

20EL-AC 715 lb. (325kg)

20EL-DC 785 lb. (356kg)

25EL-AC 800 lb. (363kg)

25EL-DC 870 lb. (395kg)

30EL-AC 870 lb. (395kg)

30EL-DC 940 lb. (427kg)

36EL-AC 972 lb. (441kg)

36EL-DC 1042 lb. (473kg)

41EL-AC 1070 lb. (486kg)

41EL-DC 1140 lb. (518kg)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Jlg 41EL Operator Manual Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Jlg 41EL Operator Manual