Jlg 41EL Operator Manual Manuel d'utilisateur télécharger pdf (Page 29)

SECTION 3 - USER RESPONSIBILITIES & MACHINE CONTROLS

3120781 – JLG Lift – 3-5

Figure 3-5. Decal Locations (1703778 decal from Front View)

WARNING

CRUSHING HAZARD

• Always look in the direction of

movement.

• Keep clear of obstructions.

Keep all body parts inside

platform during operation.

Failure to follow instructions

could result in death or

serious injury.

TIP-OVER HAZARD

• Do not exceed platform rated

capacity or rated number of

people.

• Do not expose platform to high

winds or horizontal forces.

• Machine must be on smooth, firm

and level surface before elevating

platform. Install all outriggers and

adjust jacks to contact the floor.

Machine wheels must clear the

ground. Use bubble level provided

on machine to level base before

elevating platform.

Death or serious injury could

occur from a tip-over.

CRUSHING/TIPPING

HAZARD

• Use handles provided to move unit.

• On a level surface, always travel with

platform end leading way.

• On a slope, always travel with

platform end on low side of slope.

• Two people may be required on

slopes up to 5 .

• A forklift must be used when moving

units on slopes greater than 5 .

• Never turn unit sideways on a

slope.

• Do not move unit on soft or uneven

surfaces, or over obstructions,

bumps, debris, etc.

Failure to follow these instructions

could result in death or serious

injury.

THIS MACHINE MUST NOT BE USED

UNTIL IT IS INSPECTED AND OPERATING

PROPERLY:

• Do not operate this machine unless you have been

properly trained as described in the JLG Operation and

Safety Manual by a qualified person and authorized to

operate this machine. Your training includes reading

and understanding the safety, operating and

maintenance instructions in manufacturerÕs manuals,

knowing your employers work rules and applicable

governmental regulations.

• Follow the instructions in the Operating Manual and

Sections 6, 7, and 8 of ANSI A92.3-1990 Manually

Propelled Elevating Aerial Platforms for daily, frequent,

and annual inspections. These may be obtained from

your authorized JLG Industries, Inc. equipment dealer

or JLG Industries, Inc.

• Check that unit is properly set up, level, and on

outriggers.

• Do not replace items (i.e., batteries, wheels,

counterweight, etc.) with items of different weight or

specification because this will affect stability of

machine.

• Do not modify or change machine without written

approval from manufacturer.

• Operate this machine with extreme caution. STOP all

operation if malfunction occurs.

Improper use of this machine could cause death

or serious injury.

FALLING HAZARD

• Keep both feet on platform floor.

• Do not climb, sit or stand on

platform guard rails.

• Ensure entrance area is properly

closed.

• Do not use planks, ladders or

Commentaires sur ces manuels

Pas de commentaire

Jlg 41EL Operator Manual Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Jlg 41EL Operator Manual