Jlg 41AM Operator Manual Manuel d'utilisateur télécharger pdf (Page 71)

SECTION 5 - OPTIONAL EQUIPMENT

3121211 – JLG Lift – 5-3

5.2 AM-SE - STRADDLE EXTENSION – INSTALLATION

Description

The AM-SE straddle extension increases the versatility of the AM

Series by providing a bridge for access to areas where obstacles

such as rows of seats, machines, counters or stairwells are

encountered.

The straddle extension provides clearance of up to 48 inches

(1.2m) in height and is adjustable from 104 to 128 inches (2.6m

to 3.3 m) in length.

Straddle Adaptor Wiring Components

The straddle wiring for both the AM Series includes the follow-

ing parts:

1. Two (2) short wiring harness’.

2. Two (2) Spring Clips.

3. Four (4) #10-24 x .625 long bolts, nuts and lock wash-

ers.

4. Two (2) 3/8" I.D.\ 1/2" O.D grommets.

Straddle Adaptor Wiring Installation

1. Set up machine installing outriggers, level machine

and raise the platform as high as necessary to allow

access base frame.

NEVER WORK UNDER AN ELEVATED PLATFORM UNTIL PLATFORM HAS BEEN

SAFELY RESTRAINED FROM ANY MOVEMENT BY JACK STAND OR OVERHEAD

SLING.

2. Place a floor jack or other suitable support between

the mast and floor before working underneath plat-

form.

NOTICE

ON AC MACHINES UNPLUG THE POWER CORD, DC POWERED MACHINES DIS-

CONNECT THE MAIN POWER SUPPLY CONNECTOR ON THE SIDE OF THE BAT-

TERY STORAGE/CHARGER BOX.

NOTE: The holes in the base frame for mounting the spring clips

and routing the wires through the center crossmember to

the interlock relay may already exist. If not continue with

Step 3, if holes are there, jump to Step 5.

3. Drill two (2) .219 diameter (7/32") holes per side for

each spring clip see Figure 5-2.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 97 98

Pas de commentaire

Jlg 41AM Operator Manual Manuel d'utilisateur Page 71