Jlg 1100SJP Operator Manual Manuel d'utilisateur Page 67

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 130
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 66
SECTION 4 - MACHINE OPERATION
3121255 – JLG Lift – 4-13
Swinging the Jib (1100SJP Only)
NOTE: For 1000 lb. (450 kg) mode operation, the jib must be
centered and the Jib Swing function is not operable. If the
jib is out of the centered position when in this mode, the
indicator will flash and the alarm sound until the jib is cen-
tered again. The jib swing function will allow the operator
to center the jib again.
To swing the jib, use the Jib Swing control to select Right or
Left direction.
4.10 FUNCTION SPEED CONTROL
This control affects the speed of all boom functions and Plat-
form Rotate. When in the counterclockwise maximum posi-
tion, Drive is placed in creep speed.
4.11 EMERGENCY TOWING
RUNAWAY VEHICLE/MACHINE HAZARD. MACHINE HAS NO TOWING
BRAKES. TOWING VEHICLE MUST BE ABLE TO CONTROL MACHINE AT
ALL TIMES. ON-HIGHWAY TOWING NOT PERMITTED. FAILURE TO FOL-
LOW INSTRUCTIONS COULD CAUSE SERIOUS INJURY OR DEATH.
MAXIMUM TOWING SPEED 5 M.P.H. (8 K.M.H.)
MAXIMUM TOWING GRADE 25%.
DO NOT TOW MACHINE WITH ENGINE OPERATING OR DRIVE HUBS
ENGAGED.
1. Retract, lower and position boom in travel position; lock
turntable.
Vue de la page 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 129 130

Commentaires sur ces manuels

Pas de commentaire